1000W LED Full Spectrum Indoor Grow Light Panel Lamp Hydro Plant Veg Flower New
2017 New Year Daily Deals. 1000W LED Full Spectrum Indoor Grow Light Panel Lamp Hydro Plant Veg Flower New.
High efficiency powerful 10W epistar double chips, low energy consumption. Free strong hanging kits are available for easy installation. All LEDs with a zener diode to ensure one LED out the rest can still working very well. Transferring 90% of electrical energy into plant absorbable luminous energy.
It is 3 to 5 times in efficiency than HID lights and HPS lights. The heat sink can make it work longer. Multiple power supplies make the voltage more stable.
Terminal blocks for easy replacement. Chips brand: 10W Epistar double chips. Chips Qty: 100pcs (Red 70pcs, Blue 20pcs, white 8pcs, UV1pcs, IR1pcs, the IR led is not very bright but it's helpful for flowering). Actual Power Consumption: about 190W, energy saving increase the yield easily. Dimension: 12.28.272.83inch / 31021072mm.
Coverage Area: about 3 x 3.5 Square Feet (The lighting area and the height are changeable according to different plants and environments). Application : Ideal for all phases of plant growth, and works well with water solution culture and soil culture.
Can be used in house garden, pot culture, garden, sowing, breeding, farm, flower exhibition, bonsai, garden, green house, sowing, breeding, farm, greenhouse cultivation, water soluble breeding, greenhouse cultivation, pipeline cultivation and so on. Lighting Time setup: Vegetative Stage: 12-14 hours on; Flowering Stage: 9-12 hours on. Fruiting Stage: 7- 8 hours on.
Suggest distance above plants: 1.2-2m. 1X Morsen1000W LED grow light.
Instruction of LED Light Fixture. 3-Recommended height to the plant: 0.5m1.5m according to different growing stage.
4-Suggested continous working time: 1016 housrs per day. 5-It is required to make product work indoor. 6-Please do not touch or strike the LED light during its normal working.
7-Be sure not to make the product get any touch with water or use it at the place where the water is dripping. The power of more than 100W in the proposed suspension height of 0.5-2 meters away from the plant, the power of less than 100W in the proposed suspension height of 0.3-1.5 meters away from the plant, the specific light photosynthesis effect as follows. Question 1: The actual power of the plant lamp is inconsistent with the title power? On the "power of the plant lights with the title power is inconsistent" problem: take 1000W light as an example, not to say that the entire lamp at work when the power is 1000W, 1000W is: each of our lamp beads (dual chip) can bear power is 10W, that is, the rated power is 10W (rated power is not necessarily the actual power), then 10W 100LEDs = 1000W. Why is not the power of our lights made to 1000W?
Answer: For the work environment, the heat problem is one of the most important reasons: for the customer to consider economic costs, we let it work in low power conditions, the product life longer. Question 2: Part of the lights do not shine?
Part of the lamp beads do not light is divided into three cases. A part of lights does not shine, indicating that the control of this line of power does not work, you need to check the power to see if the power cord is released, if not released, the line is complete, then confirm the power is bad, need to replace the power supply, the supplier can give us free power supply, we can also provide this compensation to customers. If there are a few lamp beads do not shine, it shows that the lamp beads are broken, you need to replace the lamp beads, if not replaced will not affect the normal operation of other lights, because we have a tube above the wire diodes, the realization of this lamp bead does not affect the other lights work properly. Infrared light bulb does not shine.
There is also a case of infrared light is not bright (is the customer misjudgment): for the infrared light beads, its brightness is not high, relatively dark, and some customers will think it is bad, in fact, it is not bad. Question 3: Lamp intermittent work shiny (flashing when working)?
If there is a fixed frequency of intermittent, that is, power does not match with the light board lead. Need to replace the power, or else cannot solve this problem. The lights flash at work, but also the power does not match with the light board. Need to replace the power supply, can be resolved. The power of more than 100W in the proposed suspension height of 0.5-2 meters away from the plant, the power of less than 100W in the proposed suspension height of 0.3-1.5 meters away from the plant, the specific light photosynthesis effect as the photo in the description. Only Ohio residents are required to.
We appreciate your interests and trust in our quality products. We have very strict quality control system, so we have extremely low defect rate. We value our customer service as the real and most important product of USA111 Inc.
The safest shopping you can have any-where! The item "1000W LED Full Spectrum Indoor Grow Light Panel Lamp Hydro Plant Veg Flower New" is in sale since Monday, June 19, 2017. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Gardening Supplies\Hydroponics & Seed Starting\Grow Light Kits". The seller is "campus111" and is located in Groveport, Ohio. This item can be shipped to United States, Canada.
- Type: LED Light Panel
- Brand: Unbranded
- MPN: Does not apply
- Wattage: 1000W
- Installation Area: Indoor
- Country/Region of Manufacture: China
- Chips Qty: 100pcs
- Dimension: 12.2*8.27*2.83inch / 310*210*72mm
- Actual Power Consumption: about 190W
- N.W: 2.5 KG/3KG
- Coverage Area: about 3 x 3.5 Square Feet
- Power Factor: >97%
- Lifespan: >50,000hours
- Worldwide Voltage: 85v-265v
- Working Frequency: 50~60Hz
- Working environment: -20~40 ;45%~95%RH
- UPC: Does not apply