600/1000/1200W LED Grow Light Full Spectrum Veg Flower Indoor Medical Plant Lamp
600/1000/1200W LED Grow Light Full Spectrum Veg Flower Indoor Medical Plant Lamp. High efficiency powerful 10W epistar double chips, low energy consumption. Free strong hanging kits are available for easy installation. All LEDs with a zener diode to ensure one LED out the rest can still working very well. Transferring 90% of electrical energy into plant absorbable luminous energy. It is 3 to 5 times in efficiency than HID lights and HPS lights. LED lights: 60Pcs 10W Double Chips LED.
Chips Qty: 60pcs (Red 38pcs, Blue 12pcs, white 8pcs, UV1pcs, IR1pcs). Dimensions: 12.28.272.36inch/31021060 mm. Coverage Area: Approximately 3.5 × 4 sq.
Can be used in house garden, pot culture, garden, sowing, breeding, farm, flower exhibition, bonsai, garden, green house, sowing, breeding, farm, greenhouse cultivation, water soluble breeding, greenhouse cultivation, pipeline cultivation and so on. 1X US Plug power cord. Instruction of LED Light Fixture. 3-Recommended height to the plant: 0.5m1.5m according to different growing stage. 4-Suggested continous working time: 1016 housrs per day.
Question 1: The actual power of the plant lamp is inconsistent with the title power? On the "power of the plant lights with the title power is inconsistent" problem: take 1000W light as an example, not to say that the entire lamp at work when the power is 1000W, 1000W is: each of our lamp beads (dual chip) can bear power is 10W, that is, the rated power is 10W (rated power is not necessarily the actual power), then 10W 100LEDs = 1000W. Why is not the power of our lights made to 1000W? Answer: For the work environment, the heat problem is one of the most important reasons: for the customer to consider economic costs, we let it work in low power conditions, the product life longer. Question 2: Part of the lights do not shine?
Part of the lamp beads do not light is divided into three cases. A part of lights does not shine, indicating that the control of this line of power does not work, you need to check the power to see if the power cord is released, if not released, the line is complete, then confirm the power is bad, need to replace the power supply, the supplier can give us free power supply, we can also provide this compensation to customers. If there are a few lamp beads do not shine, it shows that the lamp beads are broken, you need to replace the lamp beads, if not replaced will not affect the normal operation of other lights, because we have a tube above the wire diodes, the realization of this lamp bead does not affect the other lights work properly. Infrared light bulb does not shine. There is also a case of infrared light is not bright (is the customer misjudgment): for the infrared light beads, its brightness is not high, relatively dark, and some customers will think it is bad, in fact, it is not bad.
- Type: LED Light Panel
- Brand: Unbranded
- MPN: Does not apply
- Installation Area: Indoor
- Country/Region of Manufacture: China
- UPC: 886424363545